Modules - Ampio - Knowledge Base

M-DOT-2: 2-fields touch panel module

Module M-DOT-2 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two sensor fields and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.

Last update February 18, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation

M-DOT-4: 4-fields touch panel module

Module M-DOT-4 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has four sensor fields and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.

Last update February 18, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation

M-DOT-6: 6-fields touch panel module with a display

Module M-DOT-6 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has six sensor fields, a display and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.

Last update February 18, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation

M-DOT-9: 9-fields touch panel module

Module M-DOT-9 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has nine sensor fields and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.

Last update March 7, 2023, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation

M-DOT-GEST: Gesture recognition module MGEST-1

Module M-DOT-GEST is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module recognises hand gestures made in the proximity of its surface, as well as touch gestures on the glass front.

Last update February 18, 2025, tags: Ampio CAN modules, DOT family, Wall switch, Sensors, Dallas 18B20, Input modules

M-DOT-M18: 18-fields touch panel module with a display

Module M-DOT-M18 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eighteen sensor fields, a display supporting the functionality of swipeable screens, and a 1-Wire interface.

Last update February 18, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation, Security, Access control

M-DOT-M6: 6-fields touch panel module with a display MDOT-M4, MDOT-M4+

Module M-DOT-M6 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has six sensor fields, a display supporting the functionality of swipeable screens, and a 1-Wire interface.

Last update February 18, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation

M-DOT-R PRO: Panel module with built-in RFID reader

Module M-DOT-R PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-DOT-R PRO module is available for sale by special order. RFID card reader The module is equipped with an RFID card reader.

Last update July 14, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Security, Access control, RFID

M-DOT-R14: 14-fields touch panel module with an RFID reader

Module M-DOT-R14 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fourteen sensor fields, an RFID card reader and a 1-Wire interface.

Last update April 15, 2024, tags: Ampio CAN modules, DOT family, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID

M-DOT-R2 PRO: 2-field touch panel module with RFID reader

Module M-DOT-R2 PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-DOT-R2 PRO module is available for sale by special order. The module has two sensor fields, an RFID card reader and a 1-Wire interface.

Last update July 14, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID