Ampio CAN modules - Ampio - Knowledge Base

M-CON-IR: IR integration module MIR

Module M-CON-IR is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for IR integration. With the use of the module, it is possible to receive commands from remote controls based on the NEC protocol, and to send previously saved commands to external devices.

Last update March 21, 2024, tags: Ampio CAN modules, CON family, Output modules, Integrations, Personalisation, Air conditioning

M-CON-ENOCN-p: EnOcean integration module EnOcean-1p

Module M-CON-ENOCN-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for integration with devices that support the EnOcean 868Mhz wireless communication standard.

Last update March 21, 2024, tags: Ampio CAN modules, CON family, Junction box modules, EnOcean, Integrations

M-AV-AMP-s: Bus receiver module MAMP-1s

Module M-AV-AMP-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. Adding the module to the Ampio installation makes it possible to play music automatically when someone enters the house, or lower the volume after a certain hour.

Last update March 21, 2024, tags: Ampio CAN modules, AV family, Output modules, Integrations, DIN rail modules

M-AV-MP3-s: Audio file player module MP3-PLAYER

Module M-AV-MP3-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows you to play audio files from an installed microSD card. It has an audio output that can be connected to the M-AV-MP3-s bus receiver module or other power amplifier.

Last update March 21, 2024, tags: Ampio CAN modules, AV family, Output modules, DIN rail modules

M-IN-16s: Module with sixteen bi-state inputs

Module M-IN-16s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has sixteen alarm inputs. Alarm inputs The module has bi-state inputs that go into an active state when they are shorted to ground, allowing for the connection of any devices with potential-free contact outputs or optocoupler outputs.

Last update March 20, 2024, tags: Ampio CAN modules, IN family, DIN rail modules, Wall switch, Input modules

M-IN-2p: Module with two bi-state inputs

Module M-IN-2p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two ground detecting inputs, a 1-Wire interface and a brightness sensor.

Last update November 2, 2023, tags: Ampio CAN modules, IN family, Junction box modules, Wall switch, Sensors, Input modules, Dallas 18B20

M-IN-TCD3p: Module with three NTC sensor inputs

Module M-IN-TCD3p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has three inputs for NTC temperature sensors with a resistance within the range of 5-20kΩ at 25°C.

Last update October 27, 2023, tags: Ampio CAN modules, IN family, Sensors, Input modules, Central heating, Junction box modules

M-CON-ZWAVE-s: Z-Wave integration module MZWAVE-1s

Module M-CON-ZWAVE-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for integration with a number of devices that support the Z-Wave wireless communication protocol.

Last update September 26, 2023, tags: Ampio CAN modules, CON family, Sensors, Wall switch, Central heating, DIN rail modules, Integrations

M-DOT-9: 9-fields touch panel module

Module M-DOT-9 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has nine sensor fields and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.

Last update March 7, 2023, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation

M-IN-RKE4-p: Receiver module for wireless remote controls

Module M-IN-RKE4-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module enables the reception of signals generated by Ampio wireless remote controls.

Last update July 7, 2022, tags: Ampio CAN modules, IN family, Junction box modules, Access control, Security, Wireless

Ampio CAN modules tag