Module M-AV-MP3-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows you to play audio files from an installed microSD card. It has an audio output that can be connected to the M-AV-MP3-s bus receiver module or other power amplifier.
Last update March 21, 2024, tags: Ampio CAN modules, AV family, Output modules, DIN rail modules
Module M-IN-16s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has sixteen alarm inputs. Alarm inputs The module has bi-state inputs that go into an active state when they are shorted to ground, allowing for the connection of any devices with potential-free contact outputs or optocoupler outputs.
Last update March 20, 2024, tags: Ampio CAN modules, IN family, DIN rail modules, Wall switch, Input modules
Module M-CON-ZWAVE-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for integration with a number of devices that support the Z-Wave wireless communication protocol.
Last update September 26, 2023, tags: Ampio CAN modules, CON family, Sensors, Wall switch, Central heating, DIN rail modules, Integrations
Module M-CON-CAN-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module allows for galvanic separation of two CAN bus segments. This may be useful, for example, to separate the bus section serving devices installed outside the building from the main bus part, or to separate sections of the installation between which there may be a ground potential difference.
Last update February 23, 2022, tags: Ampio CAN modules, CON family, DIN rail modules