Audio connection with an intercom via SIP
SIP configuration instructions using Akuvox and Doorbird intercoms as examples
Last update August 2, 2024, tags: SERV family, Integrations, Configuration, IP, Mobile app, Ampio Designer, DoorBird, Intercom
SIP configuration instructions using Akuvox and Doorbird intercoms as examples
Last update August 2, 2024, tags: SERV family, Integrations, Configuration, IP, Mobile app, Ampio Designer, DoorBird, Intercom
Module M-ROOM-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module can provide many of the functionalities envisioned by the Ampio building automation system’s architecture.
Last update July 29, 2024, tags: Ampio CAN modules, ROOM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, LED lights, Open-collector drivers, Central heating, SATEL, Hotel, Roller shutters and blinds, RS-232, Security
Module M-ROOM-s PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module can provide many of the functionalities envisioned by the Ampio building automation system’s architecture.
Last update July 29, 2024, tags: Ampio CAN modules, ROOM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, LED lights, Open-collector drivers, Central heating, SATEL, Hotel, Roller shutters and blinds, RS-232, Security
The following tutorial outlines the steps needed to add a Fakro wireless roller shutter in order to control it from the Ampio UNI mobile app.
Last update April 30, 2024, tags: Integrations, Ampio Designer, Mobile app
Module M-OUT-4p is a component of the Ampio system. Required voltage to power the module is 12 — 16V DC. The module is controlled via CAN bus. The module has four voltage analogue outputs, four analogue inputs and a 1-Wire interface.
Last update April 15, 2024, tags: Ampio CAN modules, OUT family, Output modules, Junction box modules, Input modules, Integrations, Dallas 18B20
Module M-CON-232-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for the integration of devices equipped with an RS-232 communication interface with the Ampio home automation system.
Last update March 21, 2024, tags: Ampio CAN modules, CON family, Sensors, SATEL, Security, DIN rail modules, Integrations, RS-232, Air conditioning, Weather station
Module M-CON-IR is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for IR integration. With the use of the module, it is possible to receive commands from remote controls based on the NEC protocol, and to send previously saved commands to external devices.
Last update March 21, 2024, tags: Ampio CAN modules, CON family, Output modules, Integrations, Personalisation, Air conditioning
Module M-CON-ENOCN-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for integration with devices that support the EnOcean 868Mhz wireless communication standard.
Last update March 21, 2024, tags: Ampio CAN modules, CON family, Junction box modules, EnOcean, Integrations
Module M-AV-AMP-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. Adding the module to the Ampio installation makes it possible to play music automatically when someone enters the house, or lower the volume after a certain hour.
Last update March 21, 2024, tags: Ampio CAN modules, AV family, Output modules, Integrations, DIN rail modules
A guide to performing the first configuration of M-SERV family modules
Last update November 27, 2023, tags: SERV family, Configuration, IP, Integrations