Dimmer - Ampio - Knowledge Base

M-CON-DL-s: DALI bus integration module MDALI-1s, M-CON-DALI-s

There are two methods for connecting the power supply to the M-CON-DL-s module, depending on the number of controllers. A detailed diagram is provided at the end of this manual. Module M-CON-DL-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC.

Last update March 20, 2026, tags: CCT, Ampio CAN modules, CON family, Output modules, DIN rail modules, Lights, Dimmer, Dali, Integrations, LED lights, RGBW lights

M-DIM-1p: Single output dimmer module

Module M-DIM-1p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has one dimmable output, two ground detecting inputs and a 1-Wire interface.

Last update August 22, 2025, tags: Ampio CAN modules, DIM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Junction box modules, Lights, Dimmer

M-DIM-2s: Dimmer module with two outputs

Module M-DIM-2s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two dimmable outputs. In the standard version of the module, the maximum power of the receiver connected to a single output is 150W.

Last update August 22, 2025, tags: Ampio CAN modules, DIM family, Output modules, DIN rail modules, Lights, Dimmer

M-CON-KNX-s: KNX integration module MKNX-1s

Module M-CON-KNX-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module enables two-way communication between devices operating within the CAN and KNX bus.

Last update March 14, 2025, tags: Ampio CAN modules, CON family, DIN rail modules, Lights, Dimmer, KNX, Integrations

M-DIM-1s: Single output dimmer module Discontinued

Module M-DIM-1s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has one dimmable output. Dimmable outputs With the use of the module, it is possible to control the light intensity of incandescent bulbs, halogens, dimmable LED bulbs and dimmable CFL fluorescent lamps.

Last update February 18, 2025, tags: Ampio CAN modules, DIM family, Output modules, DIN rail modules, Lights, Dimmer

DALI integration

A guide for the integration of Ampio with the DALI system.

Last update October 9, 2024, tags: Lights, Dimmer, Dali, Integrations, Configuration, Ampio Designer

M-LED-s: Ampio lighting bus controller

Module M-LED-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as an OWA lighting bus controller. OWA lighting bus The OWA lighting bus (One Wire Ampio) is a solution dedicated to controlling LED lighting.

Last update September 11, 2024, tags: Ampio CAN modules, LED family, DIN rail modules, Output modules, Dimmer, LED lights, Lights, OWA lighting

M-LED-p: Ampio lighting bus controller

Module M-LED-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as an OWA lighting bus controller. It also has four ground-detecting inputs and a 1-Wire interface.

Last update September 11, 2024, tags: Ampio CAN modules, LED family, Junction box modules, Wall switch, Sensors, Input modules, Output modules, Dallas 18B20, Dimmer, LED lights, Lights, OWA lighting, Central heating

Dimmer tag