Module M-CON-ENOCN-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for integration with devices that support the EnOcean 868Mhz wireless communication standard.
Last update April 21, 2026, tags: Ampio CAN modules, CON family, Junction box modules, EnOcean, Integrations
Module M-CON-WZ-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as a base station for wireless modules. Only one M-CON-WZ-p module can be present within an Ampio building automation installation.
Last update April 21, 2026, tags: Ampio CAN modules, Ampio WZ family wireless modules, CON family, Junction box modules
Module M-CON-WL-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as a base station for wireless modules that communicate using the Ampio LoRa technology
Last update April 21, 2026, tags: Ampio CAN modules, CON family, Junction box modules, LoRa
Module M-LED-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as an OWA lighting bus controller. It also has four ground-detecting inputs and a 1-Wire interface.
Last update April 21, 2026, tags: Ampio CAN modules, LED family, Junction box modules, Wall switch, Sensors, Input modules, Output modules, Dallas 18B20, Dimmer, LED lights, Lights, OWA lighting, Central heating
Module WL-REL-2p is a component of the Ampio system. Required voltage to power the module is 110 — 250V AC. The module is controlled via the Ampio LoRa wireless interface. The module has two relay outputs and two AC inputs.
Last update August 22, 2025, tags: Ampio LoRa wireless modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Lights, Wall switch, Wireless, LoRa
Module WL-REL-ROL1p is a component of the Ampio system. Required voltage to power the module is 110 — 250V AC. The module is controlled via the Ampio LoRa wireless interface. The module has two AC inputs and two relay outputs in the roller shutter and blinds' drive controller mode.
Last update January 7, 2025, tags: Ampio LoRa wireless modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Roller shutters and blinds, Wireless, Wall switch, LoRa
Module WL-OC-RGBW1p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via the Ampio LoRa wireless interface. The module has four OC outputs operating in an RGBW lighting controller mode.
Last update January 7, 2025, tags: Ampio LoRa wireless modules, OC family, Junction box modules, Output modules, Lights, LED lights, RGBW lights, Wireless, LoRa
Module M-IN-2p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two ground detecting inputs, a 1-Wire interface and a brightness sensor.
Last update November 2, 2023, tags: Ampio CAN modules, IN family, Junction box modules, Wall switch, Sensors, Input modules, Dallas 18B20